CCI Power Loads for Cartridge Fired Projectors

Pneudart CCI Power Loads for Cartridge Fired Dart Projectors.
CCI Power Loads are available in the following three strengths:

2A2 BROWN = Light
3C22 GREEN = Medium
4C22 YELLOW = Strong

The power loads should be used in conjunction with the Power Control Chart that comes with your dart projector and accounts for RDD Dart size and distance from the target animal.

We recommend using CCI Branded Power Loads as these have proved to be the most consistent and are what the Power Control Charts have been developed around.
Other brands of power loads and nail gun charges can be used however you need to be mindful that these are not as consistent as CCI charges and have different powder combinations as they are intended for different purposes so you will not acheive the same consistency and results as you will with CCI charges.
It is not recommended to use power loads stronger than YELLOW as you run the risk of causing injury to the animals if not controlled correctly and possible damage to your dart projector.

Dart Systems NZ stocks all strengths of CCI Power Loads,  and we sell them in the following quantities:

BROWN = Box of 100 Charges
GREEN = Box of 100 Charges
YELLOW = Box of 100 Charges